Install Android 6.0.1 Marshmallow on Galaxy S6 Edge+ G928K/L/S

After successfully updating the Galaxy S6, S6 Edge, and Note 5 to Android 6.0.1 Marshmallow. The company is now rolling out the update for the Galaxy S6 Edge+ (G928K/L/S). Although the update is rolling out via OTA and is available on KIES. It’s happening on a staged basis, so it will probably take some time before the update reaches your device.

If you own a Galaxy S6 Edge+ G928K/L/S and your phone still isn’t giving you the update notification, you can update your phone manually. Updating the phone manually is completely safe provided you do everything as the guide suggests you and flash the right firmware for your device.

If you are willing to update your Galaxy S6 Edge+ G928K/L/S, you can do so by following the simple guide.

Note: Since there are 3 different variants being covered, the guide is split into 3 different portions. Each variant will have its dedicated guide.

Install Android 6.0.1 Marshmallow on Galaxy S6 Edge+ G928K

  1. Download and extract the latest Odin flashtool > Download.
  2. Download the Galaxy S6 G928K firmware and extract it if it is a zip file to get the .md5 or .tar.md5 file > Download.
  3. Turn off your phone and put it in download mode by pressing and holding Power + Home + Volume Down Button for a few seconds until you receive a warning message, simply press volume up button to proceed.
  4. Connect your phone to your PC using a USB cable and the Odin COMM port should turn Yellow/Blue depending on the version.
  5. Click on AP/PDA button and select the .tar/.tar.md5 file you extracted earlier.
  6. Make sure only F.Reset Time and Auto Reboot are checked.
  7. Press START and wait for the process to finish.
  8. The process will take 5 – 10 minutes, once completed, you will get PASS message on Odin and your device will restart.

Install Android 6.0.1 Marshmallow on Galaxy S6 Edge+ G928L

 

  1. Download and extract the latest Odin flashtool > Download.
  2. Download the Galaxy S6 G928L firmware and extract it if it is a zip file to get the .md5 or .tar.md5 file > Download.
  3. Turn off your phone and put it in download mode by pressing and holding Power + Home + Volume Down Button for a few seconds until you receive a warning message, simply press volume up button to proceed.
  4. Connect your phone to your PC using a USB cable and the Odin COMM port should turn Yellow/Blue depending on the version.
  5. Click on AP/PDA button and select the .tar/.tar.md5 file you extracted earlier.
  6. Make sure only F.Reset Time and Auto Reboot are checked.
  7. Press START and wait for the process to finish.
  8. The process will take 5 – 10 minutes, once completed, you will get PASS message on Odin and your device will restart.

Install Android 6.0.1 Marshmallow on Galaxy S6 Edge+ G928S

  1. Download and extract the latest Odin flashtool > Download.
  2. Download the Galaxy S6 G928S firmware and extract it if it is a zip file to get the .md5 or .tar.md5 file > Download.
  3. Turn off your phone and put it in download mode by pressing and holding Power + Home + Volume Down Button for a few seconds until you receive a warning message, simply press volume up button to proceed.
  4. Connect your phone to your PC using a USB cable and the Odin COMM port should turn Yellow/Blue depending on the version.
  5. Click on AP/PDA button and select the .tar/.tar.md5 file you extracted earlier.
  6. Make sure only F.Reset Time and Auto Reboot are checked.
  7. Press START and wait for the process to finish.
  8. The process will take 5 – 10 minutes, once completed, you will get PASS message on Odin and your device will restart.

 

NO COMMENTS

LEAVE A REPLY