Despite the fact that Android released official Jelly Bean 4.3 on Samsung Galaxy S3 with many Samsung Galaxy S4 features, it still lacks performance it is slow and hovering with bugs. Developers are cashing on the open source nature of Android and doing everything to port Samsung Galaxy S4 features into Galaxy S3. Because of absence of hardware sensors in S3, many features will not function like Air-View and most of the Air-Gestures.  But the good news is Eye Scrolling and Smart Stay, Smart Rotation will work flawlessly. Another custom ROM stuffed with Galaxy S4 features named S4 Revolution can be installed on Samsung Galaxy S3.

 [AdSense-A]

You can also install S4 Revolution ROM with ease; just follow our step by step guide.

s4 revolution custom rom

If you are familiar with custom ROM installation than you won’t find it difficult. Even if its your first time, don’t worry just pay little more attention to the details. We are laying here step by step guide on How to install S4 Revolution custom ROM Android Jelly Bean 4.3 on Samsung Galaxy S3 I9300.

Before you begin, make sure your Samsung Galaxy S3 is charged up to 80% at least (To be on safe side, charge it at-least up to 90%) and most importantly back up your Contacts, Call Logs, and Messages. This is important in case something goes wrong so you could restore your mobile phone.

 [AdSense-A]

Disclaimer:

The methods involved in flashing custom roms and rooting your phone is highly custom and may result in bricking your device,and has nothing to do with Google or the device manufacturers which is Samsung in our case. In case of any mishap we may not be held responsible. Follow these instructions to the letter to avoid any mishap or bricking. Make sure that whatever you do, you are doing it at your own responsibility.

Pre-requites before installation of S4 Revolution:

  • Your device must be rooted and latest TWRP or CWM Recovery must be installed on the device.
  • Make sure USB Cable is disconnected from your PC while the installation is in process.
  • Enable USB Debugging Mode
  • Make sure your device is not power deprived and battery level is at 85% or more.
  • Make sure you have Samsung Galaxy S3 I9300, as this tutorial is strictly for I9300.
  • Backup your Mobile EFS Data

 

How To Install S4 Revolution Android 4.3 Jelly Bean Custom ROM on Galaxy S3 I9300.

  • Download S4 Revolution for Galaxy S3 on your PC.
  • Disconnect the USB Cable
  • Turn of your device

TWRP Users.

TWRP-2.3.3.01

  • Tap on Wipe button and select Cache
  • Swipe the confirmation Slider
  • Revert to Main Menu and select Install Button
  • Find the S4 Revolution.zip, swipe the slider to initiate the Installation
  • Select Wipe data in Aroma Installer
  • If you are already running MG4 Modem, install it as well otherwise not required.
  • You will be asked to Reboot System now, once the installation is completed successfully.
  • Select Reboot System Now

For CWM Recovery based users:

cwm

  • Turn your phone off and open recovery mode. Press and hold volume up + Home + Power buttons. Hold until you see some text on the screen.
  • Choose Wipe Cache.
  • Then go to advance and select Devlik Wipe Cache, to avoid bootloop.
  • Navigate to install zip from sd card
  • Then select choose zip from sd card from the options.
  • Select  S4 Revolution.zip file and confirm the installation on next screen
  • Select Wipe data in Aroma installer
  • If you are already running MG4 Modem, install it as well otherwise not required.
  • You will be asked to Reboot System now, once the installation is completed successfully.
  • Select Reboot System Now.

And that’s all folks! Your Samsung Galaxy S3 is loaded with S4 Revolution Android 4.3 Jelly Bean Custom ROM. The first boot can take up to 5 minutes.

 Enjoy!!!!

NO COMMENTS

LEAVE A REPLY

This site uses Akismet to reduce spam. Learn how your comment data is processed.